Skip to content

EcoPro200 Assembly Manual – Click Here

EcoPro300 Owner’s Manual – Click Here

EcoPro300 Crated Processor Assembly Manual – Click Here

EcoPro350 Assembly Manual – Click Here

 

1.) Hose Diagram for adding an RR102 to an EcoPro Processor – Click Here

2.) Hose Diagram for adding an RR102 and an RR2501/RR2504 Infeed to an EcoPro Processor – Click Here

3.) Hose Diagram for adding an RR106 to an EcoPro Processor – Click Here

4.) Hose Diagram for adding an RR105 and an RR2520 Infeed to an EcoPro Processor – Click Here

5.) Hose Diagram for adding an RR2520 Infeed to an EcoPro Processor – Click Here

6.) Control Valve Plumbing for RR102, RR106 – Click Here

7.) Adding a RR2521 Infeed with RR102 or RR106 – Click Here

RR25T Crated Processor Assembly Manual – Click Here

**Remember for safety and for Processor Efficiency**

Logs MUST be loaded into the processor chamber butt end (large end) first, this helps to keep the log stable and also helps the wood move through the wedge properly.

Our firewood processor hydraulic chainsaw runs the same as a standard chainsaw – do not over tighten the chain as too much pressure on the saw motor may cause the seal to leak and/or the chain to break!

Let the saw do the work, don’t force the blade through your log and the chain will last longer.

Range Road Processor Maintenance Video